InHand 5G FWA02 Delivers Reliable Networking for Retail Stores
1. Scenario Background As information technology advances in the retail industry, high-speed networks are critical for improving business efficiency and customer experience. Newly opened retail outlets face challenges in quickly deploying stable, always-on
How to set custom DNS server addresses on the FWA02?
1. Go to [Services > DNS Server]. 2. Enter the preferred and secondary DNS server addresses (e.g., 8.8.8.8 for Google DNS). 3. Click "Save". The device will use these DNS servers instead of the ones obtained from the upstream interface.
How to download device logs for troubleshooting on the FWA02?
1. Log in to the web interface. 2. Navigate to [Status > Logs]. 3. Choose "Download Logs" (operational logs) or "Download Diagnostic Logs" (includes system info and configurations). 4. The log file will download to your local device for analysis.
How to enable IP Passthrough on the FWA02?
1. Access the web management interface. 2. Go to [Services > Passthrough Settings]. 3. Enable "IP Passthrough" and optionally enter a "Passthrough MAC" (only the bound device gets the upstream IP). 4. Save the configuration. Note: This disables static
How to configure the FWA02’s WAN port to use a static IP?
1. Go to [Internet > Uplink Table]. 2. Find the "WAN" interface and click "Edit". 3. Select "IPv4 Type: Static IP". 4. Enter the static IP address, subnet mask, gateway, and DNS servers (provided by your ISP). 5. Click "Save" to apply the settings.
How to check detailed cellular signal parameters (e.g., RSRP, SINR) on the FWA02?
1. Log in to the web interface (default IP: 192.168.2.1). 2. Navigate to [Status > Cellular Signal]. 3. You’ll see key metrics like RSRP (≥-90dBm = good), SINR (≥10dB = good), and RSSI, along with signal strength levels (Excellent/Green = ASU≥20, Fair/Blue
How to switch the 5G FWA02's SIM card working mode from "Only SIM1" to "Only SIM2"?
1. Log in to the web interface and go to [Internet > Uplink Table]. 2. Find the "Cellular" interface and click "Edit". 3. Under "Work Mode", select "Only SIM2" (default is "Only SIM1"). 4. Click "Save" to apply the setting; the device will switch to using
What is the default WiFi password for the 5G FWA02, and how is the SSID formatted?
The default WiFi password (for both 2.4GHz and 5GHz) is the last 8 digits of the device's serial number (SN). The default SSIDs are: 2.4GHz SSID starts with "FWA02-" (followed by the last 6 digits of the wireless MAC address), and 5GHz SSID starts with
How to restore the 5G FWA02 to factory default settings using the Reset button?
1. After powering on the device, press and hold the Reset button for 5~10 seconds until the System indicator turns solid blue. 2. Release the button (the blue light will flash). 3. Press and hold the Reset button again until the solid blue light turns
What is the default login IP, username, and password for the 5G FWA02?
The default LAN IP is 192.168.2.1. For the username and password, please check the device's nameplate (they are not pre-set as fixed values). You can access the web management interface by entering the IP in a browser after connecting your PC to the FWA02's
Carrier Aggregation in LTE and 5G: Component Carriers vs Mobile Operators
The term “Carrier Aggregation” may cause confusion among customers. A common misunderstanding is the belief that this feature allows a device to connect to multiple mobile carriers at the same time (for example, Verizon + AT&T). This is not what Carrier
How to change the passowrd of FWA02?
Please navigate to System—>Account Management, change the password and save.
Band locking IR624
Hi, Is there any way to do band locking or cell locking on the IR624? letting me to choose which bands I want to use or lock to a specific cell? Thanks
How to do band locking on IR624?
How to do band locking on IR624? I cannot find the functionality. Thanks