IG502 API Integration Support Request
Dear InHand Support Team, I need to integrate our IG502L (Firmware V2.2.0) with our platform via API.
Telegraf
Would you like to know how to install and use Telegraf on the IG502?
Telegraf
Gostaria de saber como instalar e usar o Telegraf no IG502?
How to setup Wi-Fi on IG502
Background: InHand InGateway with the -WLAN tag on the part number have a Wi-Fi module to allow the router to broadcast internet like an Access Point. Here is how to set it up. 1. Connect PC directly to router via Ethernet and log into router at 192.168.2.1
IG502 DOUT - how to ensure DOn is not driven low after boot.
Does any one know of a way to configuring the device so it starts up and doesn't drive the digital outputs low by default? The IG502 has low side drivers for DO0-3 with weak pull ups to 5~6V, This makes it very easy, and is the typical way, to drive relays.
IG902 reboot
I have IG902 with 4G module... Inhand routers all have SMS reset/reboot option, but IG not... How to restart device on remote site ? Is there any option to do that ? or just scheduled restart eg.. every day at 12AM ??
Web management interface for IG902H not accessible
We have an edge gateway IG902H which was already configured. A few days back it was powered off due to some network and infrastructure related changes at the site. Now, after connecting back to the power, it is not showing the web management interface
NAT 1:1 IG502
How to do NAT 1:1 LAN/WAN on IG502? Could anyone help please?
IG902 updated firmware download
Hello, we can't find the download link for the latest firmware version for the InHand IG902 Gateway. In the support section there is only the 2.0.0 version from 2021. Where can we find an updated version? The oldest one we have has V2.0.6 and Chrome recently
How to solve the problem that the browser cannot access the IG configuration page
If Inscribe.
IG502
Anyone using the IG502 with Losant.com ? I've tried three different devices from Inhand and none of them will authenticate using MQTT on Losant.
Does IG902 have Modbus <-> 104 conversion functionality?
If inscribe.
Dial Switch on IG502
The pull-down resistance is OFF by default, and the dial switch is close to the non-antenna side. The corresponding relationship of dial switch is as follows: Interface 1A pull-up resistance Interface 1B pull-down resistance Interface 2A pull-up resistance
How can I add multiple modbus tag values together into another tag.
The idea is to be able to add the values of multiple data points or tags coming from a plc into one virtual tag that I can send via MQTT. I have multiple flows coming from a controller, I want to add these flows together and send the total out via m
IG902 no external network
I'm having a difficult time getting the IG902 network configured correctly. I can only connect to it on GE 0/2 bridge mode. Everything else is a fail. GE 0/1 (set to dynamic) is connected to the router. It has an IP address and I can see that it's listed
Problem with Device Supervisor on IG902 Gateway
Hello, we are using the Device Supervisor on an InHand InGateway IG902 to retrieve data from industrial PLCs to our Thingsboard server. We are having a problem configuring one of the machines we need to monitor. The machine has an OPC-UA server, but the
InGateway USB port
Hi, these devices are special but, why not include the libusb library to be able to use the usb port as serial? It would give many opportunities for use Thanks
InGateway 502 firmware download
The link for download of firmware 502 is not valid
IG902H AWS IoT Greengrass import and installation failure
Hi, I’m Eng. Giuseppe Ferro from M2D company. We are from Italy. Could you help me with AWS IoT Greengrass installation and configuration? There is nothing on internet or documentation about it. I’m not able to import Key and Certs. I have installed 1.10.2-RC1
How to setup APN on IG502
1. Connect PC directly to router and log into router at 192.168.2.1 using default credentials (adm/123456) 2. Go to NetworkàNetwork InterfaceàCellular, and check the Enable Cellular. 3. Confirm SIM1 Network Provider is Profiles 1. 4. Click the edit button
Publish to IG502 using MQTT Has anyone tried this?
Has anyone had any success publishing anything using MQTT to the IG502? I can read do0 for example but can't publish to it. The status never changes. Can you see any log on this device from remote?
IG902B as Azure IoT Gateway for Modbus TCP Devices
Hey guys, I'm trying to hook up an IG902B with some Schneider PLCs and get the data on Azure IoT Hub. I'm been successful on configuring the PLC devices, but I'm stuck at configuring the Device Supervisor. First I was getting an error trying to enable
IG902-Device_supervisor
Refer to the attachment.
What industrial protocols can be supported by IG902?
Now, Modbus EtherNET/IP ISO on TCP and OPCUA can be supported in our Device Supervisor APP. We’re not planned to provide with API of industrial protocols, but we can provide with Demos of OPUCA Modbus ISO on TCP. If you want to use Profibus or Profinet,