How to check the GNSS positioning status of the VG814?
1. Via Indicators: The GNSS indicator blinks green during positioning and stays solid green when positioning is complete; it’s off if GNSS is disabled. 2. Via Web Interface: Log in > Go to [Status] to view detailed GNSS information (e.g., latitude, longitude,
How to connect the VG814 to an existing Wi-Fi network (as a client)?
1. Navigate to [Network > Wi-Fi] and select Wi-Fi 2.4G or Wi-Fi 5G. 2. Set "Station Role" to "Client". 3. Enter the target Wi-Fi SSID, select the authentication method (matches the AP), and input the password. 4. Click "Apply & Save" — the Wi-Fi indicator
How to enable dual-SIM auto-switch for cellular connectivity?
1. Log in to the web interface > Go to [Network > Cellular]. 2. Check "Dual SIM Enable" to activate the feature. 3. Select "Main SIM" (SIM1 by default). 4. Set "Max Number of Dial" (default 5 — the device switches to SIM2 if SIM1 fails to dial). 5. Click
How to factory reset the VG814 using the hardware Reset button?
1. Power on the device and immediately press and hold the Reset button. 2. Keep holding for ~15 seconds until only the System indicator is steady red. 3. Release when the System indicator turns off and lights red again. 4. Press and release Reset once
What are the default login credentials and Wi-Fi settings for the VG814?
Default web login: IP = 192.168.2.1, Username = "adm", Password = "123456". Default Wi-Fi: 2.4G SSID starts with "VG814-" (last 6 digits of device identifier), 5G SSID with "VG814-5G-". Both use WPA2-PSK encryption, and the password is the last 8 digits
How to check the GNSS positioning status of the VG710?
1. Via Indicators: The GNSS indicator blinks green during positioning and stays solid green when positioning is complete; it’s off if GNSS is disabled. 2. Via Web Interface: Log in > Go to [Status] to view detailed GNSS information (e.g., latitude, longitude,
How to connect the VG710 to an existing Wi-Fi network (as a client)?
1. Navigate to [Network > Wi-Fi] and select Wi-Fi 2.4G or Wi-Fi 5G. 2. Set "Station Role" to "Client". 3. Enter the target Wi-Fi SSID, select the authentication method (matches the AP), and input the password. 4. Click "Apply & Save" — the Wi-Fi indicator
How to enable dual-SIM auto-switch for cellular connectivity?
1. Log in to the web interface > Go to [Network > Cellular]. 2. Check "Dual SIM Enable" to activate the feature. 3. Select "Main SIM" (SIM1 by default). 4. Set "Max Number of Dial" (default 5 — the device switches to SIM2 if SIM1 fails to dial). 5. Click
How to factory reset the VG710 using the hardware Reset button?
1. Power on the device and immediately press and hold the Reset button. 2. Keep holding for ~15 seconds until only the System indicator is steady red. 3. Release when the System indicator turns off and lights red again. 4. Press and release Reset once
What are the default login credentials and Wi-Fi settings for the VG710?
Default web login: IP = 192.168.2.1, Username = "adm", Password = "123456". Default Wi-Fi: 2.4G SSID starts with "VG710-" (last 6 digits of device identifier), 5G SSID with "VG710-5G-". Both use WPA2-PSK encryption, and the password is the last 8 digits
VG&VT Protection Rating
VT Series: Model Type VT200 VT310 VT320 Protection Rating IP40 IP66 IP66 VG Series: Model Type VG710 VG710-M VG810-Road VG810-Rail Protection Rating IP64 IP64 IP53 IP53
Why the High Resolution Total Vehicle Distance can be retrieved, but the standard Total Vehicle Distance cannot?
Clarification: Both VD (Vehicle Distance) and VDHR (High Resolution Vehicle Distance ) represent vehicle distance. VDHR provides higher resolution, while VD is non-high-resolution. For the gateway OBD service (for example, when retrieving OBD data via
The machanism of data aquisition and publish on VT310
Take the screenshot as an example: The polling interval is set to 30 seconds (southbound), while the Modbus cloud reporting interval is set to 60 seconds (northbound). The southbound data acquisition and northbound data reporting operate independently.
How to know the history of the VG's cellular signal along the railway route?
If you want to know the history cellular signal of the VG device, you could view it on Device Live Cloud. Please navigate to Cellular Signal, adjust the duration, then obverse the signal details.
Can the VG814 be managed remotely via InCloudManager? How to set it up?
Yes. 1. Log in to InCloudManager (https://star.inhandcloud.com/) and go to "Add Device". 2. Enter the VG814’s Serial Number (SN) and MAC address (found on the nameplate). 3. On the VG814’s web interface, go to [System > Cloud Management] and enable "InCloudManager
How to reset the VG814 to factory settings via the hardware button?
1. Power on the VG814 and locate the "RESET" button (marked on the device casing). 2. Press and hold the RESET button for 10–15 seconds until the system indicator flashes. 3. Release the button and wait for the device to restart—all configurations will
What is the acceptable input voltage range for the VG814?
The VG814 supports a wide DC input voltage range (typically 12V–24V, compliant with standard vehicle power systems). To ensure stability, use the original power adapter and check that the input voltage stays within the range marked on the device nam
How to enable GNSS positioning data upload on the VG814?
1. Log in to the VG814’s web interface. 2. Navigate to [Positioning > Upload Settings]. 3. Check "Enable Positioning Upload" and select the upload interval (e.g., 10s–3600s). 4. Save the configuration—if connected to InCloudManager, the data will sync
What are the default login credentials and LAN IP for the VG814 vehicle gateway?
The default LAN IP is typically 192.168.2.1 (check the device nameplate for confirmation). The default username and password are printed on the device’s nameplate—log in to the web management interface by entering the IP in a browser after connecting
InHand VG710 Powers Public Bus Wi-Fi & In-Vehicle Network Solutions
1. Scenario Background A city’s public bus fleet faced key gaps: no stable Wi-Fi for passengers, unreliable in-vehicle video surveillance data transmission, lack of a unified in-vehicle network, and non-compliance with IPv6 requirements. 2. Product Selection
InHand VG814 Enhances Train Safety, Management & Passenger Experience
1. Scenario Background A regional railway fleet faced key challenges: Disparate on-board devices (engine, CCTV, doors, etc.) lacked unified monitoring Unstable connectivity disrupted CCTV data & passenger infotainment Delayed fault detection for on-board
Heavy Equipment Monitoring & Asset Management
1. Background In large-scale construction sites and remote mining operations, heavy machinery such as excavators, bulldozers, and haul trucks are high-value assets operating in extreme environments. Fleet managers face challenges in monitoring engine
5G-Enabled Smart Ambulance & Telemedicine
1. Background In emergency medicine, the "Golden Hour" is critical. Traditional ambulances often operate as isolated units, with paramedics unable to share high-quality data with hospital specialists until they arrive. The challenge is to transform an
Smart Public Transportation & Fleet Management
1. Background Modern urban public transport systems face multiple challenges: ensuring passenger safety, maintaining vehicle health to prevent breakdowns, providing high-quality on-board Wi-Fi, and tracking vehicles accurately in "urban canyons" (areas
What Bluetooth version does the VG710 integrate, and what is its use?
The VG710 is equipped with Bluetooth 4.1. It can connect to on-board Bluetooth electronic devices, enabling wireless communication with peripheral sensors, mobile terminals, or other Bluetooth-enabled in-vehicle equipment to support scenarios like data
How can I export OBD data from the VG710?
To export OBD data: Log in to the web interface and navigate to "Services >> OBD". Click "Scan OBD Data" to generate a report containing vehicle condition data and diagnostic information. Click "Export OBD Report" to save the generated report to local
Does the VG710 support QoS and traffic control?
Yes, the VG710 includes QoS (Quality of Service) and traffic control features. Users can set egress/ingress maximum bandwidth for specific interfaces, create traffic classifiers and policies to prioritize critical services, and configure daily/monthly
How can the VG710 help in monitoring and improving driver safety?
The device features an integrated 3D accelerometer and gyroscope that monitor dangerous driving behaviors in real time, such as rapid acceleration, sudden braking, sharp turns, and collision events. This data can be analyzed to take preventive measures,
How can I upgrade the VG710’s firmware?
To upgrade the firmware: Access the web interface via 192.168.2.1 using the default credentials. Navigate to "Administration >> Upgrade". Click "Browse" to select the firmware file, then click "Upgrade". Wait for the upgrade to complete (do not operate
What certification standards has the VG710 obtained?
The VG710 meets multiple international certifications, including CE, E-Mark, ITxPT, FCC, IC, PTCRB, RoHS, VZW, AT&T, and TMO. It also complies with vehicle standards (ECE-R10, R118), rail standards (EN50155, EN50121), and EMC Level 3 requirements.
What are the two primary Wi-Fi working modes for the gateway?
The gateway can be configured in "AP" (Access Point) mode, where other wireless terminals can connect to it for internet access, or in "Client" (STA) mode, where the gateway connects to an external wireless access point for its own internet connecti
Can the VG710 support two SIM cards for network redundancy?
Yes, the VG710 features dual SIM card slots and supports a "Dual SIM Enable" function4. By default, the dual-SIM function is disabled and SIM1 is used, but users can enable it in the cellular settings to allow for automatic switching and link backup.Users
How can I interpret the status of the System indicator on the VG710?
The System indicator uses colors and blinking patterns to show device health: blinking green indicates the system is operating properly, while blinking red suggests a system fault. A steady red light means the system is starting, and blinking blue signifies
What edge computing capabilities does the VG710 support for custom development?
The VG710 has a powerful edge computing platform that supports Python 3, C/C++, and Docker. It also supports Node-RED low-code edge computing solutions and provides SDKs for Microsoft Azure IoT Edge.
What are the power supply requirements and vehicle-specific power management features?
The device supports a wide input voltage range of 9-36V DC. It includes built-in voltage transient protection and supports ignition signal detection. It also features power management settings like a configurable power-off delay (default 30s) and standby
How does the VG710 collect vehicle diagnostic data?
The gateway integrates multiple vehicle diagnostic interfaces, including 2 CAN channels, J1939, and OBD-II. It can collect real-time data such as fuel level, mileage, driving speed, engine RPM, and coolant temperature by connecting to the vehicle's diagnostic
What is the operating temperature range of the VG710?
The VG710 is designed for harsh in-vehicle environments with an operating temperature range of -30°C to +70°C (-22°F to +158°F). It also has an IP64 protection rating, making it resistant to water splash, dust, shock, vibration, and damp heat.
What industrial interfaces does the VG710 5G version provide?
The 5G version’s industrial interfaces include: 20PIN I/O: Audio left/right channels, Mic IN, RS485A/B, RS232_TX/RX, 1-Wire, DO1/DO2, and 4 AI/DI channels. 10PIN EXT: K-LINE, L-LINE, 2 CAN buses (CAN1_H/L, CAN2_H/L), and J1708_A/B. Additional interfaces:
What are the default Wi-Fi settings of the VG710?
By default: Both 2.4G and 5G Wi-Fi APs are enabled. The 2.4G SSID starts with "VG710-" followed by six digits; the 5G SSID starts with "VG710-5G-" followed by six digits. Authentication uses WPA2-PSK, and the password is the last eight digits of the device’s
What network security features are included in the VG710?
The VG710 provides comprehensive network security, including: VPN protocols: IPsec, GRE, L2TP, and OpenVPN for encrypted remote access. Firewall functions: ACL, NAT, MAC-IP binding, SPI, and DoS attack defense. AAA authentication: Support for local authentication,
Next Page