• Modbus IL915L

    Hi, I don't get see modbus device through TCP , Do you have a guide? I'm going to use only a PC -Router- Modbus device, I used TCP server configuration and the conecction is ok but I don't see modbus device. If I conecct serial modbus ditectly to the

  • Where can I configure InConnect in IR6XX?

    If inscribe.

  • Which protocol are you using for the communication between the InConnect and the IR615

    If inscribe.

  • How many user accounts and routers can I add to one InConnect account?

    If inscribe.

  • What about the charge of InConnect Service?

    If inscribe.

  • Traffic usage of InConnect service?

    What is the minimum monthly traffic for a router when it does not generate any traffic data and the network is normal?

  • Where is the InConnect server deployed?

    If inscribe.

  • How do you ensure secure transmission of InConnect?

    If inscribe.

  • What kind of downstream devices can be managed via the InConnect?

    If inscribe.

  • Can my iPhone manage the InConnect?

    If inscribe.

  • Do you collect our data when we are operating through the InConnect?

    If inscribe.

  • Does IG902 have Modbus <-> 104 conversion functionality?

    If inscribe.

  • Why can't I find the VPN configuration on the WebUI of IG902?

    If inscribe.

  • How many devices can be connected to IG902 via modbus?

    If inscribe.

  • How to mount USB flash memory in the container of IG902?

    If inscribe

  • Where can I get the user manual of InGateway?

    If inscribe.

  • Dial Switch on IG502

    The pull-down resistance is OFF by default, and the dial switch is close to the non-antenna side. The corresponding relationship of dial switch is as follows: Interface 1A pull-up resistance Interface 1B pull-down resistance Interface 2A pull-up resistance

  • Device WebGUI is not opening using HTTPS

    The WebGUI (Web Graphic User Interface) of devices such as FWA, ER805, ODU2002, and IG502/902 comes with HTTPS enabled by default. If you encounter an SSL error while attempting to open the WebGUI, it is likely impacted by recent browser updates. Google

  • How can I add multiple modbus tag values together into another tag.

    The idea is to be able to add the values of multiple data points or tags coming from a plc into one virtual tag that I can send via MQTT. I have multiple flows coming from a controller, I want to add these flows together and send the total out via m

  • Wireguard Setup

    Is there any instructions how to setup wireguard road warrior style? The alternative would be ipsec, however it does not appear as though the ipsec server is an option and only the client is the only available option.

  • IG902 no external network

    I'm having a difficult time getting the IG902 network configured correctly. I can only connect to it on GE 0/2 bridge mode. Everything else is a fail. GE 0/1 (set to dynamic) is connected to the router. It has an IP address and I can see that it's listed

  • IR305 Cellular transmit power

    Hello InHand team, What is the IR305's (North America) characterized nominal and maximum transmit power for its different bands (4G/3G/2G/etc)? Do you have any s-parameters of the antenna port?

  • IR302 setup VPN for one internal IP and bypass VPN for Wifi user

    Hello, I have setup an IR302 Router with a VPN service. I am able to use the VPN IP address for the system and connect to a modbus device that is plugged into the LAN port. However the VPN is not as fast as my ISP. I have been trying to figure out the

  • Problem with Device Supervisor on IG902 Gateway

    Hello, we are using the Device Supervisor on an InHand InGateway IG902 to retrieve data from industrial PLCs to our Thingsboard server. We are having a problem configuring one of the machines we need to monitor. The machine has an OPC-UA server, but the

  • Issue reading Modbus register

    I cannot read some register with measure monitor in device supervisor but when i test with modbus poll it works. In the log i receive : Modbus read registers(slaveId:1,function:4,start:2099,len:1) failed(Gateway path unavailable)

  • InConnect Service Tutorial

    If you are new to InConnect Service (ICS), please follow this start-up guide first:https://doc-center.inhandnetworks.com/CloudServices/InConnect/InConnectService After adding the InHand router to ICS, the device should show up in your account like this:

  • InGateway USB port

    Hi, these devices are special but, why not include the libusb library to be able to use the usb port as serial? It would give many opportunities for use Thanks

  • How to apture CAN frame through tcpdump?

    Test steps are as follows:

  • IR305 from Verizon Slow Upload Speed/ Trouble Connecting some Applications

    If you purchased an IR305 from Verizon and experiencing slow upload speed or having trouble connecting certain Apps, please change the following settings. Connect to IR305 using WiFi or ethernet cable open 192.168.2.1 on your web browser login using adm/123456

  • WiFi password for IR305 or IR615 Purchased from Verizon

    If you purchased an IR305 or IR615 from Verizon and trying to find the WiFi password for SSID: inhand, please try inhand123 as the password. If you are using an IR305 from Verizon, please check out this article for fixing slow upload speed issue:IR305

  • IR302 Config management

    Good morning I have a problem with importing configuration on IR302. With simple configurations backup and import of the configuration works well. But I have an application where I implemented an OpenVPN server on IR302. In this case the configuration

  • InGateway 502 firmware download

    The link for download of firmware 502 is not valid

  • IR301 Idle Data Consumption

    I am using a IR301 model with a verizon sim IoT sim card. I have one mqtt gateway connected via WiFi to the router. Without any client IoT data being transmitted, I am using roughly 20mb of data per month. Are there any settings I can change to lower

  • IR301 Idle Data Consumption

    I am using a IR301 model with a verizon sim IoT sim card. I have one mqtt gateway connected via WiFi to the router. Without any client IoT data being transmitted, I am using roughly 20mb of data per month. Are there any settings I can change to lower

  • IG902H AWS IoT Greengrass import and installation failure

    Hi, I’m Eng. Giuseppe Ferro from M2D company. We are from Italy. Could you help me with AWS IoT Greengrass installation and configuration? There is nothing on internet or documentation about it. I’m not able to import Key and Certs. I have installed 1.10.2-RC1

  • The guide for how to set group of devices on Device Manager

    The guide for how to set groups of devices on Device Manager In this article you will find answers from following questions: 1. How to create a group and add devices? 2. How to delete devices from a group? 3. How to delete a group? 4. How to edit the

  • Common Access Point Name (APN) by North American Carriers

    If you are not sure your APN, please use following table as a guide. For most accurate information, please contact with your ISP.

  • MTU Setting and fixing packet loss

    1.What is the MTU? MTU is Maximum Transmission Unit, which is the largest packet sent over a network. The unit of MTU is bytes. MTU determines what is the maximum size of packet that a router will allow. 2. The size of MTU If the MTU is too large, it

  • How to setup APN on IR900

    1. Connect PC directly to router via Ethernet and log into router at 192.168.2.1 using default credentials (adm/123456) 2. Go to NetworkàCellular and check the Enable. 3. Slide down to the bottom, click on the APN to set to the desired value and hit the

  • How to setup Wi-Fi on ER805

    Background: The ER805 can be used as an AP to provide wireless network access with multiple SSIDs. Users can customize the usage and configuration of different SSIDs. Here is how to set it up. Points to note: l A device has two primary SSIDs (2.4G and

  • Next Page

  • Most Discussed Topics

  • IR302 how to reset

    IR302 how to reset

  • IR302 Continuously Disconnecting and Reconnecting

    Hello, I recently purchased an Inhand IR302 to provide a cellular connection to a computer via ethernet. I have a SIM card that I put in the IR302. When I configure it for AT&T it says “detecting modem” and after a few seconds it connects. However, after

  • IR302 won't factory reset

    I have an IR302 that I acquired second hand. I have been trying to follow the instructions I found online to do a factory reset on the unit but it does not seem to work. I can't get the status LED to ever turn off after the first press of the reset button.