• How to set up link backup

    1. Connect the PC to the router directly via Ethernet. Go to 192.168.2.1 on a web browser and login with default credentials (adm/123456). 2. Go to Statusànetwork connections, confirm the Internet connection status in WAN mode, cellular mode and Wi-Fi

  • How to setup APN on IG502

    1. Connect PC directly to router and log into router at 192.168.2.1 using default credentials (adm/123456) 2. Go to NetworkàNetwork InterfaceàCellular, and check the Enable Cellular. 3. Confirm SIM1 Network Provider is Profiles 1. 4. Click the edit button

  • How to create an online portal account-InCloud

    1. Type the URL in the browser: https://star.inhandcloud.com. Please click "Create now" to create an online portal account. 2. Fill in the basic information in the box as follows. Then click the Register. 3. After clicking register, a confirmation email

  • How to create an online portal account-InConnect Service

    1. Type the URL in the browser: https://ics.inhandnetworks.com/. Please click the Registration to create an online portal account. 2. Fill in the basic information in the box as follows. Then click the Registration. 3. After clicking the Registration,

  • How to set router to connect to another WiFi(WAN-STA)

    1. Connect PC to router via Ethernet, open web browser and go to 192.168.2.1 (if this doesn't work, try incognito mode with http://192.168.2.1). Log in with default username and password on the label of the router (adm/123456) 2. Go to Networkà Switch

  • How to set up Dual SIM

    1. Connect PC to router and log into the router. Go to Network => Cellular. 2. Check “show advanced Options” and “Dual SIM enable”. 3. Scroll to the bottom, and create 2 profiles, ask the provider of your SIM cards about the APN, and fill in the blanks.

  • How to create an online portal account-Device Manager

    1.Type the url in the browser: https://iot.inhandnetworks.com/. Please click the Registration to create an online portal account. 2. Fill in the basic information in the box 3.After clicking the Registration, check your mail box to complete the registration.

  • How to set up Wi-fi on IR300 and IR600

    Background: InHand routers with the -WLAN tag on the part number have a Wi-Fi module to allow the router to broadcast like an Access Point. Here is how to set it up. Connect PC directly to router via Ethernet or Wi-Fi and log into router at 192.168.2.1

  • Unable to Access Router on 192.168.2.1

    Background: When a PC is connected directly to the InHand router via Ethernet, it should be able to get an IP address via DHCP. If not, then the PC may be set on manual IP or other issues. 1. On Mac, check in System Preferences>Network>(Name of Ethernet

  • How to set up APN on IR300 or IR600

    Connect PC to router, open web browser and go to 192.168.2.1 (if this doesn't work, try incognito mode with http://192.168.2.1). Log in with default username and password on the label of the router (adm/123456) Go to Network>Cellular. Confirm SIM1 Network

  • Official InHand Setup and Troubleshooting Guide (In Progress)

    Hi, This will be a work in progress, but please check this post for updates on setup and troubleshooting. For further troubleshooting topics not covered, please contact: godwin.wey@inhandnetworks.com patrick.jin@inhandnetworks.com irene.peng@inhandnetworks.com

  • PoE Switches?

    Will there be any PoE switch options?

  • One click installation of L2TP server in Linux system

    root login system wget --no-check-certificate https://raw.githubusercontent.com/teddysun/across/master/l2tp.sh chmod +x l2tp.sh //Change to executable right restriction ./l2tp.sh //Execute installation script Please enter IP-Range: //config l2tp

  • Download and install OpenVPN server for Linux (one click installation command)

    Open source project GitHub wget https://git.io/vpn -O openvpn-install.sh && bash openvpn-install.sh Recommended UDP protocol: 1 Select according to the network environment. After installation, export the opnvpn configuration file generated under the root

  • Frequency check

    How to check the 3G, 4G and 5g wireless network frequency bands around the world https://www.frequencycheck.com

  • Publish to IG502 using MQTT Has anyone tried this?

    Has anyone had any success publishing anything using MQTT to the IG502? I can read do0 for example but can't publish to it. The status never changes. Can you see any log on this device from remote?

  • IG502 Where is the "devices" menu?

    There is no "device list" under "Device Supervisor" as shown in a product video.

  • IG502 Where is the "devices" menu?

    There is no "device list" under "Device Supervisor" as shown in a product video

  • Verizon SIM Card's Static and Dynamic IP Setting

    1. Get a dynamic IP You don’t need set anything, just keep the default settings, inhand router could automatically register VzW network and get a dynamic IP. 2. Get a Static IP You got a Verizon SIM card and it could get a static IP, then in the inhand

  • IG902B as Azure IoT Gateway for Modbus TCP Devices

    Hey guys, I'm trying to hook up an IG902B with some Schneider PLCs and get the data on Azure IoT Hub. I'm been successful on configuring the PLC devices, but I'm stuck at configuring the Device Supervisor. First I was getting an error trying to enable

  • IR651

    I have an HMIGTO schneider panel in it, must it be able to send mail, how do I set up the ir615 card? Thank you.

  • IG902-Device_supervisor

    Refer to the attachment.

  • What does LTE CAT x mean?

    LTE UE（User Equipment） categories and class definitions are defined by the 3GPP organization according to the data rate performance of the user terminal equipment. Next, I will show you a few tables, I believe this will help you have a clearer understanding

  • An example to configure GRE over IPSEC

    In this example, we give a very simple topology to make you easily understand how to configure GRE over IPSEC The topology after simplifying Configuration Step 1: Set IPsec extern profile and configure GRE first Enable IPsec function, according to your

  • IPSec tunnel between Juniper SRX and InRouter

    If inscribe.

  • How to do hard reset?

    For IR600 and IR900. Restore to factory default via front panel RESET button: Step 1. Locate the RESET button on the device; Step 2. Turn on the device’s power; within 10 seconds, press and hold RESET button; Step 3. When ERR LED is on, release the RESET

  • How to upgrade firmware?

    1. check your current f/w version. Go to Adminiatration->System 2. ask your sales or tech support for the latest one. 3. upload the f/w. 4. upgrade. 5. reboot. 6. log in again.

  • What industrial protocols can be supported by IG902?

    Now, Modbus EtherNET/IP ISO on TCP and OPCUA can be supported in our Device Supervisor APP. We’re not planned to provide with API of industrial protocols, but we can provide with Demos of OPUCA Modbus ISO on TCP. If you want to use Profibus or Profinet,

  • How to configure DDNS in IR302?

    1. Open Web site http://www.noip.com create an account Put in Email Username Password Domain name. P-1 2. Confirm the email sent by NoIP and verify the account by clicking "Confirm Account". P-2 3. Log in NoIP P-3-1 P-3-2 4. ConfigIR302 4.1 Make sure

  • How can I access my IR302 when I enable IP Passthrough？

    The LAN ip of IR302 will change after you configure IP Passthrough. It becomes the first 16 bit mask IP in the IP segment assigned by the operator to the downstream device of IR302. You can also check the gateway of the downstream device, and that IP

  • How to configure Link Backup between Wired and Wi-Fi for IR302?

    1. Go to Network >> WAN.We select Static IP for the WAN connection, and configure the WAN portas follows: 2. Configure WLAN as STA mode. 1) Go to Network >> WAN(STA), selectDHCP for WLAN connection. 2) Go to Network >> WLAN(Client), and then click Scan.Now

  • How to configure Link Backup between Wired and Wi-Fi for IR302?

    1. Go to Network >> WAN.We select Static IP for the WAN connection, and configure the WAN portas follows: 2. Configure WLAN as STA mode. 1) Go to Network >> WAN(STA), selectDHCP for WLAN connection. 2) Go to Network >> WLAN(Client), and then click Scan.Now

  • What is the Dual-SIM switch mechanism of IR302?

    Main SIM card is the SIM card that enables dialing first after the device is on. When Main SIM is disconnected for some reason or fail to dial up, and then Backup SIM will be on. The settings of Max Number of Dial, CSQ Threshold and Min connected time

  • How to configure WLAN STA mode in IR302?

    1) Go to Network ->Switch WLAN Mode, select STA. 2) Reboot after apply the configuration. 3) Go to Network >> WAN(STA), selectDHCP for WLAN connection. 4) Go to Network->WLAN Client, apply the default configuration first. 5) Click Scan, and then connect

  • How to configure the IR302 as WLAN WDS?

    1) Select AP mode. Go to Network-> Switch WLAN Mode. The default mode of WLAN is AP. After the switch of mode, it needs a reboot to take effect. 2) Go to NETWORK->WLAN. Enable WLAN functionality. You’ll see the Wi-FI LED is flashing. 3) Enable WDS. Configure

  • How to configure WLAN AP mode in IR302?

    1) Select AP mode. Go to Network-> Switch WLAN Mode. The default mode of WLAN is AP. After the switch of mode, it needs a reboot to take effect. 2) Go to NETWORK->WLAN. Enable WLAN functionality. 3) Change (if you wish) the SSID and the password. 4) Verify

  • IR302 Link Backup

    If you want to use your regular internet as your primary, and use cellular as backup when your primary is down, IR302 Link backup function could help you switch the uplink automatically. By default, WAN/LAN port on IR302 is a LAN port, we need to change

  • Connect the downstream devices of two different sites through InConnect

    I would like to connect IR302 routers in a way where all downstream devices can see each other. How would I go about doing this through InConnect? 1.Create the InHand Routers on InConnect dashboard, and then add the downstream devices. You can refer to

  • What is the power required to get it to work, can we connect it to a dc solar panel and batteries?

    What is the power required to get it to work, can we connect it to a dc solar panel and batteries?

  • How to do Hardware Restore?

    I have a router. The model is IR902. I can not remember the password. How to restore it?

  • Most Discussed Topics

  • IR302 how to reset

    IR302 how to reset

  • IR302 Continuously Disconnecting and Reconnecting

    Hello, I recently purchased an Inhand IR302 to provide a cellular connection to a computer via ethernet. I have a SIM card that I put in the IR302. When I configure it for AT&T it says “detecting modem” and after a few seconds it connects. However, after

  • IR302 won't factory reset

    I have an IR302 that I acquired second hand. I have been trying to follow the instructions I found online to do a factory reset on the unit but it does not seem to work. I can't get the status LED to ever turn off after the first press of the reset button.