• How do I choose the "Bind" mode for the CAN interface on the VG

    Q: When configuring the CAN interface on the VG (Vehicle Gateway), should I select "Bind OBD" or "Bind Custom"? A: The choice depends on whether you want the Gateway’s native system to manage the connection or if you intend to control it via your own

  • IR302/IO

    Please help me understand the use of Non-privileged users. I do not see any change in features by logging in with non-privileged password. Any way to see the IO status without going to menu/io path? Also I dont find a method to transition the output if

  • IR302 as a Transparent Bridge

    Can the IR302 operate as a Transparent Bridge to an existing Access Point (AP)? I am able to configure the IR302 as a WSTA Client, but it operates as a router with an network address on the LAN interface and a different network address on the WLAN interface.

  • IR302 connection speed reduces over time

    Hello, We are using the IR302 LTE modem with the Peplink Mobility 22G antenna in a stationary setup and we are getting good connection speed (downlink and uplink) for a while, but over time (on the order of 30 minutes to 1 hour) the connection speed reduces.

  • Device WebGUI is not opening using HTTPS

    The WebGUI (Web Graphic User Interface) of devices such as FWA, ER805, ODU2002, and IG502/902 comes with HTTPS enabled by default. If you encounter an SSL error while attempting to open the WebGUI, it is likely impacted by recent browser updates. Google

  • DeviceSupervisor Agent (DSA) plugin for an EC312?

    Where can I download the DeviceSupervisor Agent (DSA) plugin for an EC312? My unit with firmware V2.0.12 does not have it installed by default.

  • MobiusPi API

    MobiusPi API Manual (internal development interface) https://sdk.ig.inhandnetworks.com/en/latest/API-manual-EN.html The internal working principle of the gateway is to provide Python developers with a function library that directly accesses the underlying

  • What is the default login account password for Inhand devices?

    The default account for the previous device was adm and the password was 123456. It is recommended to change it immediately for the first login to ensure security. In order to meet security requirements, the main focus now is on the initialization password

  • How to upgrade firmware?

    1. check your current f/w version. Go to Adminiatration->System 2. ask your sales or tech support for the latest one. 3. upload the f/w. 4. upgrade. 5. reboot. 6. log in again.

  • Does the SIM card support hot swapping?

    No, the SIM card must be inserted while the device is powered off, pressed until the card slot is locked, and the device will automatically recognize it when powered on.

  • IPSec tunnel between Juniper SRX and InRouter

    If inscribe.

  • Sending sms

    hi it is possible with typicall command to send SMS with IR615 router?

  • How to check the signal indicator light of IR900 router?

    If all three indicator lights are on, it means the signal is good (20-31asu). If two lights are on, it means it is basically normal. If only one light is on, the antenna or SIM card needs to be checked.

  • What is the status of the indicator light when the GNSS positioning of the vehicle gateway VT310 is successful?

    The GNSS indicator light is on for a long time, indicating successful positioning. A flash (0.5Hz) indicates successful timing, while a slow flash (1Hz) indicates that the function is enabled but not positioned. The core value of successful GNSS timing

  • IPsec with ubiquiti secure gateway thru IR302

    I have a pair of USGs I'm trying to set up a VPN with. One of them is behind an IR302 and cannot figure out for the life of me the proper way to do it. I've been working on this for two weeks and nothing. Does anyone have any experience you can lend on

  • How to remotely restart a device through a web interface?

    pls follow the below steps 1. login the web gui 2.[System → Reboot], click the "Rboot" button. During the restart process, the network will be temporarily interrupted. It is recommended to avoid operating during peak business hours.

  • How to adjust the login timeout of IR302?

    pls follow the below steps

  • InGateway 502 firmware download

    The link for download of firmware 502 is not valid

  • How to check the GNSS positioning status of the VG814?

    1. Via Indicators: The GNSS indicator blinks green during positioning and stays solid green when positioning is complete; it’s off if GNSS is disabled. 2. Via Web Interface: Log in > Go to [Status] to view detailed GNSS information (e.g., latitude, longitude,

  • port forwarding and dyndns

    Hi, I have Inhand IG902 and I have problem with port forwarding. On site I have few PLC modules that is connected to other site with inhand VPN service ( port GE 0/1 )...That works OK.. Also I would like to use video survailence but NOT with VPN service.

  • How can I allow external networks to access a specific service on my internal LAN?

    You can use the Port Mapping feature (found under "Firewall >> Port Mapping"). This forwards data sent to a specific port on the router's WAN IP to a specific internal IP and port on the LAN. The router supports up to 50 port mapping rules.

  • İnhand ir 915l reboot problem

    Hello, my ir 915L router has a constant rebooting problem, it keeps restarting after doing a startup reset and it has not improved in any way. I could not connect in any way, including WiFi and ethernet.

  • How to install the SIM card of InRouter305 correctly?

    InRouter305 uses pop-up card holder. Stab the hollow at the left of the card holder and the card holder will pop up. Then, install the SIM/UIM card and press the card holder back to the card slot. To prevent damage to the SIM card, please power off the

  • How do I log in to the VT Config Tool?

    Connect the device to your PC via the USB-to-Serial cable or Bluetooth. Open the VT Config Tool, click "Connect Device," and enter the default username admin and password 123456. The default baud rate is 115200.

  • What is the configuration path for the IG900 access device cloud platform?

    1. Connect PC to IG900 via GE0/2 port and access 192.168.2.1 (default account: adm/123456); 2. Navigate to [System Management → Device Cloud Platform]; 3. In the "InHand Connect Service" tab, fill in the server address "ics.inhandiot.com" and the InConnect

  • What built-in tools are available for network diagnosis?

    The router includes three main tools under the "Tools" menu: PING Probe: To check connectivity to a destination host. Route Probe (Traceroute): To detect routing faults and hop counts. Network Speed Test: To test upload/download speeds (results are viewed

  • Status report activation

    I'd tried to enabling status report on ir302, but on the modem log like this : 31> Aug 7 06:12:31 rmonthird[4304]: HTTP:Hostname:xxx.id, Port:80, Post_filename: <31> Aug 7 06:12:31 rmonthird[4304]: TCP or HTTP:server=[x.x.x.x], server_port=[80] <31> Aug

  • How many end-nodes can the EC312 LoRaWAN Gateway support simultaneously?

    Powered by the high-performance Semtech SX1302 baseband chip, the EC312 is designed to handle high-density traffic, supporting up to 2,000 nodes within its coverage area.

  • How to restart the cellular service via HTTP API on IR302?

    Here is the command and test result: curl -u adm:123456 "192.168.2.1:4444/apply.cgi" -d "_service=wan1-restart" -H "Content-Type:text/plain"

  • Verizon SIM Card's Static and Dynamic IP Setting

    1. Get a dynamic IP You don’t need set anything, just keep the default settings, inhand router could automatically register VzW network and get a dynamic IP. 2. Get a Static IP You got a Verizon SIM card and it could get a static IP, then in the inhand

  • VG814 The working principle of logs

    System logs Capacity configuration: The total fixed size is 1MB, divided into 2 512KB files for cyclic use; Writing and uploading: After a single file is filled, it is uploaded to the TMS platform and then switched to another file to continue writing;

  • InConnect Service Tutorial

    If you are new to InConnect Service (ICS), please follow this start-up guide first:https://doc-center.inhandnetworks.com/CloudServices/InConnect/InConnectService After adding the InHand router to ICS, the device should show up in your account like this:

  • How to customize the WiFi SSID and password on the EAP600?

    1. Log in to the web interface (192.168.10.1). 2. Go to [Config > Wi-Fi > SSIDs]. 3. Click "Edit" for the target SSID (2.4G or 5G). 4. Enter a new SSID name and password, then select the encryption method (e.g., WPA2-PSK/WPA3-PSK). 5. Click "Save" to

  • IR302 firmware

    Hi, i recently bought 9 routers IR302 and 3 of its has a lower firmware v3.5.50, the others has v3.5.59. Where can i found the newer firmware (in the download section only are available the v3.5.50), the problem that i have is when i try to import the

  • Can I hot-swap the Micro SD card or SIM cards for EC312?

    No. Both the SIM cards and the Micro SD card must be installed or removed while the device is powered off. Hot-swapping is explicitly not supported for these interfaces.

  • Connecting with Siemens Sm@rtClient using InHand router IR615

    Good morning, I have an InHan IR615-WLAN router (firmware version 2.3.0.r4870) connected to an automations with PLC, Panel Pc, vison systems, robots ect. It was configured by importing a backup from another modem currently running. The router is connected

  • HTTP API Document for IR300 and IR600 series

    Regarding IR series, we provide the HTTP_API for parameters value checking and setting. Please check the attachment for your reference. The document IR600 and IR300 HTTP API and Status Report-1.9 is the total info of the HTTP_API, contains how to set

  • How does the device's Sleep Mode work?

    The VT310 uses a state machine with three modes: Run, Temp Run, and Sleep. It enters Sleep mode when the vehicle ignition (IGT) is OFF or external power is removed (voltage drops below sleep threshold). It can be configured to wake up periodically using

  • How to wire the InDTU324 with USB-serial adapter?

    As the picture shows: 1. Blue Wire: RX1(pin2 of InDTU)--------TXD(USB-serial adapter) 2. Red Wire: TX1(pin3 of InDTU)--------RXD(USB-serial adapter) 3. White Wire: GND(pin8 of InDTU)--------GND(USB-serial adapter)

  • What WiFi encryption methods does IG502 support?

    Support WPA2-PSK and WPA3-PSK encryption

  • Next Page