How to set up port forwarding
Background: Port forwarding is used to allow the router to forward traffic from a public IP to another interface (typically LAN). This allows a user to reach a device on the router through the public web. In addition, if multiple devices use the same
Application Guide for Easy OpenVPN Multiclient Mode Setup
1. Summary A VPN tunnel is an encrypted connection between your device and a VPN server. OpenVPN is currently considered the top form of VPN tunneling protocol. That's because its encryption is especially strong. It's also adept at getting past firewalls.
IR300/CR202 Link Backup
If you want to use your regular internet as your primary, and use cellular as backup when your primary is down, IR302/305 or CR202 Link backup function could help you switch the uplink automatically. Note: Only CR202 with firmware V1.0.13 or later support
Connecting with Siemens Sm@rtClient using InHand router IR615
Good morning, I have an InHan IR615-WLAN router (firmware version 2.3.0.r4870) connected to an automations with PLC, Panel Pc, vison systems, robots ect. It was configured by importing a backup from another modem currently running. The router is connected
Upgrade the firmware of IR915 to a fixed version
Notice: Upgrade the latest firmware if your IR900 product current firmware version equals or is lower than r8968, otherwise which maybe causes unexpect restart or another unstable symptom. Preparation： Save running configuration and export it. Go to Administration
Override WAN DNS provided by wireless carrier on IR611
Hello, We're looking to test out some routing changes and we need the ability to replace the WAN-provided DNS primary/secondary IPs with our own. I've tried using the router's portal (it's an IR611) but that doesn't seem to do the trick. Is there a way
How to setup Wi-Fi on IR900
1. Connect PC directly to router via Ethernet and log into router at 192.168.2.1 using default credentials (adm/123456) 2. Go to NetworkàWi-Fi, and check the Enable. 3. Change the Station Role to AP. Change SSID if needed. Change Auth Method to WPA2-PSK.
Issues with remote connecting to private network
hi there i just received my IR300. Hoping to set it up with OpenVPN to access some remote farm devices. My network looks like the below (obviously, IP addresses here are not real values): - Router 1: ADSL Intenet Router (IP:192.168.100.0/24) - Router
can not get IR302 to function properly??
WAN TO CELL FAIL OVER.. CELL TO LAN / WLAN as i have had it this way for some time now..my question is if i want it to work in reverse. Main Link =Cellular 1, and Backup Link=WAN, it does not work now, i have all 9 of my devices IR302's at current firmware.
telnet to computer connected to cellular router
I have an IR302 I am using one sim card from tello mobile and one from flexiboom. I would like to telnet to a raspberry pi connected to the router. Is there a way to do this through cellular connection.
Band Steering
Is there any way to do band steering on the 302, so I can pick what channel I want to use?
Slow 4G connection - Telstra Australia
The SIM I inserted into my IR302 would get speeds of 60-80mbps in a different modem and upload 20-40mbps. Through my inhand device it is 5 up and down gove or take. Are there setting I can change? How do I get better speeds?
Traffic Stats Log
I would like to be able to see what websites are being accessed from our IR302 routers, but I am unable to setup any of the status reports and nothing in the device manager shows me any useful data either. Anyone have success with this? Just wanting more
VLANs cannot access Internet.
We have a IR615 router with 4G service, and we have setup the default VLAN (VLAN ID=1, port LAN 1) with IP 10.30.0.1/24. Everything else is default settings. When I plug in a laptop with IP address 10.30.0.101, GW=10.30.0.1, DNS=8.8.8.8, I am able to
InRouter305 Site-to-Site Connectivity
Looking for assistance in configuring a site-to-site cellular connection using the InRouter305. Is there a best practice for setting up this connection with this particular product? Do I need to use InConnect to successfully setup this connection? Any
Help configuration VPN router IR915L vs Meraki Firewal
It is a pleasure to greet you and request your support to know if any of you have carried out VPN tests between an IR Router and a Meraki device or better yet, how to configure the IR so that all the data is sent to a private IP address in a linear way.
IR305 Cellular transmit power
Hello InHand team, What is the IR305's (North America) characterized nominal and maximum transmit power for its different bands (4G/3G/2G/etc)? Do you have any s-parameters of the antenna port?
IR302 setup VPN for one internal IP and bypass VPN for Wifi user
Hello, I have setup an IR302 Router with a VPN service. I am able to use the VPN IP address for the system and connect to a modbus device that is plugged into the LAN port. However the VPN is not as fast as my ISP. I have been trying to figure out the
IR305 from Verizon Slow Upload Speed/ Trouble Connecting some Applications
If you purchased an IR305 from Verizon and experiencing slow upload speed or having trouble connecting certain Apps, please change the following settings. Connect to IR305 using WiFi or ethernet cable open 192.168.2.1 on your web browser login using adm/123456
WiFi password for IR305 or IR615 Purchased from Verizon
If you purchased an IR305 or IR615 from Verizon and trying to find the WiFi password for SSID: inhand, please try inhand123 as the password. If you are using an IR305 from Verizon, please check out this article for fixing slow upload speed issue:IR305
IR302 Config management
Good morning I have a problem with importing configuration on IR302. With simple configurations backup and import of the configuration works well. But I have an application where I implemented an OpenVPN server on IR302. In this case the configuration
IR301 Idle Data Consumption
I am using a IR301 model with a verizon sim IoT sim card. I have one mqtt gateway connected via WiFi to the router. Without any client IoT data being transmitted, I am using roughly 20mb of data per month. Are there any settings I can change to lower
IR301 Idle Data Consumption
I am using a IR301 model with a verizon sim IoT sim card. I have one mqtt gateway connected via WiFi to the router. Without any client IoT data being transmitted, I am using roughly 20mb of data per month. Are there any settings I can change to lower
How to setup APN on IR900
1. Connect PC directly to router via Ethernet and log into router at 192.168.2.1 using default credentials (adm/123456) 2. Go to NetworkàCellular and check the Enable. 3. Slide down to the bottom, click on the APN to set to the desired value and hit the
How to set up link backup
1. Connect the PC to the router directly via Ethernet. Go to 192.168.2.1 on a web browser and login with default credentials (adm/123456). 2. Go to Statusànetwork connections, confirm the Internet connection status in WAN mode, cellular mode and Wi-Fi
How to set up Wi-fi on IR300 and IR600
Background: InHand routers with the -WLAN tag on the part number have a Wi-Fi module to allow the router to broadcast like an Access Point. Here is how to set it up. Connect PC directly to router via Ethernet or Wi-Fi and log into router at 192.168.2.1
Unable to Access Router on 192.168.2.1
Background: When a PC is connected directly to the InHand router via Ethernet, it should be able to get an IP address via DHCP. If not, then the PC may be set on manual IP or other issues. 1. On Mac, check in System Preferences>Network>(Name of Ethernet
How to set up APN on IR300 or IR600
Connect PC to router, open web browser and go to 192.168.2.1 (if this doesn't work, try incognito mode with http://192.168.2.1). Log in with default username and password on the label of the router (adm/123456) Go to Network>Cellular. Confirm SIM1 Network
IG502 Where is the "devices" menu?
There is no "device list" under "Device Supervisor" as shown in a product video
IR651
I have an HMIGTO schneider panel in it, must it be able to send mail, how do I set up the ir615 card? Thank you.
How to configure Link Backup between Wired and Wi-Fi for IR302?
1. Go to Network >> WAN.We select Static IP for the WAN connection, and configure the WAN portas follows: 2. Configure WLAN as STA mode. 1) Go to Network >> WAN(STA), selectDHCP for WLAN connection. 2) Go to Network >> WLAN(Client), and then click Scan.Now